E303 cam with stock heads?
#1
E303 cam with stock heads?
I was supposed to go work on my 94 gt 5.0 today. my garadge has no power so i am putting it off for another week... I am upgrading basically every bolt on. but heads.. I would like to upgrade to a e303 cam but i was not shure if that would be ok consitering I am still running stock heads. If anyone could let me know I would greatly appreciate it..I have the front of the car apaet now and if i can i should just put the cam in now while its all out! thanks again guys!
#3
RE: E303 cam with stock heads?
I have basically everything upgraded but the heads and the block. the whole induction system is done, ignition system is done, fuel , suspension, braking.. basically the whole car is done but the cam and the heads and the internal engine parts.. the engine runs strong and i am going to upgrade the heads and the block next winter but id like to upgrade the cam for at least this summer! do u think this will be ok?
#8
RE: E303 cam with stock heads?
You did a really good job of listing your mods. Theres probably at least 8 variations of any 5.0 part you could imagine. You need to be more specific.
I dont see why he'd kick himself in the **** for putting a cam in, because its not like he has to pull the heads to get at the cam. The cam will be there when he puts his heads on.
I dont see why he'd kick himself in the **** for putting a cam in, because its not like he has to pull the heads to get at the cam. The cam will be there when he puts his heads on.
#10
RE: E303 cam with stock heads?
My friend has headers back exhaust and a fms e303 cam and it rips pretty hard. I would suggest getting if for now, you will see and feel an hp gain, but when you get your heads it will be even better.