RICEBORDEAUX

I have seen the BBK, TYPHOON, GT40, COBRA, TRICK FLOW, EDELBROOK, which one of these works the best I don't have any work done to my motor just a E303 cam, 90mm mass air, Holley adj fuel regulator, mild ported and milled heads, underdrive pulleys, shortie headers, 2 1/2in H pipe with flowmasters, also would like some advice on a aftermarket throttle body I have that and the stock injectors still on my car...thanks.....

Stella94GT

the gt40 and cobra are basicaly the same, theres a thread about this in thr 5.0 tech section right now take a look for a it. about the tb, acufab makes a realy good one, bbk's supposebly make a whistle sound but people like them anyways, profesonal products make good quality one for the price.

Tberg725

GT-40, hands down best intake for a street 302.

94Yellow50

i read that a lot before i bought one..but mine doesnt do it lol..guess i lucked out..im happy with it tho...also happy with my gt40 intake..granted its pretty stock other than that...but it does the job

mjr46

for what you got a gt-40 will suit your mods fine

FuzzyDiceRule

ive always been told GT40, Edelbrock, or Holley

nseoi

gt40/cobra for your current setup.
if you plan to upgrade your heads and exhaust in the future look into the edelbrock or holley, just like fuzzy said

ALMOST STOCK

Another recommendation for the GT-40.

OneFastEclipse

GT40 now and a ported GT40 later!

Tberg725

Stick with the GT-40 when you do future mods like heads just have the GT-40 ported, the only way I would go with something other then the GT-40 is if you plan on spinning high r's