2012 falls on face when launched
#21
http://store.jpcracing.com/Metco-Ins...500_p_215.html
usually its an hour or so between runs, however it seemed to do it this weekend on street tires.
usually its an hour or so between runs, however it seemed to do it this weekend on street tires.
#22
generally those are called relocation brackets, JPC gave them a retarded name.
Do you have some timeslips so we can see the difference between runs? also, I'd monitor AITs and datalog if I were you.
also, I'd probably see if you can't leave harder (5k rpm), if traction is an issue a bigger burn out or different tires might help. On the other hand, people are pulling 1.5 60's leaving at 3800rpm on autos, so 4k rpm should be good.
Do you have some timeslips so we can see the difference between runs? also, I'd monitor AITs and datalog if I were you.
also, I'd probably see if you can't leave harder (5k rpm), if traction is an issue a bigger burn out or different tires might help. On the other hand, people are pulling 1.5 60's leaving at 3800rpm on autos, so 4k rpm should be good.
Last edited by Mishri; 08-20-2012 at 11:07 AM.
#23
First gear on the MT82 is 3.66. First on the auto is around 4.00. That could be the reason especially if the auto has 3.31 rear gears. Leaving at 5k is might be the sweet spot since the OP isn't running the Boss plenum.
Thread
Thread Starter
Forum
Replies
Last Post
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM