cam suggestions
4th Gear Member
Joined: Oct 2007
Posts: 1,049
From: Houston, TX
RE: cam suggestions
ORIGINAL: rebelcowboy
not tryin to steal the thread but redpony do those springs work with the stock retainers and everything?
not tryin to steal the thread but redpony do those springs work with the stock retainers and everything?
ORIGINAL:1995mustang818
ok then so new springs......any suggestions besides the e cam i kinda like the e cam but im ganna be putting a unit on the car so i would want some thing to work good on and off the unit
ok then so new springs......any suggestions besides the e cam i kinda like the e cam but im ganna be putting a unit on the car so i would want some thing to work good on and off the unit
3rd Gear Member
Joined: Mar 2008
Posts: 593
From: Alabama
RE: cam suggestions
the f cam respond really well with nitrous. is has a 512 lift and 226 duration. is more lopey than e cam as well. doesnt really make power until about 2800-3000rpms though, it is best when used with a power adder such as n20 or supercharging
Thread Starter
2nd Gear Member
Joined: Apr 2006
Posts: 269
From: california
RE: cam suggestions
sounds good well this is my plan
gt-40 heads with up graded springs
tfs stg 1 cam maybe some thing a little bigger
93' cobra manifold
24lbs with matching mass air maybe 30lbs because of the nitrous all ready have 6 of them of a super coupe
65mm throttle body
snyper nitrous kit with a foggermade by N.O.S maybe a 100 shot 125shot
255 walbro fuel pump
gears 4.10
suspension drag lauch kit with air bag
90/10 struts
50/50 shocks
sub frame connectors
later in the future tubular k-member
gt-40 heads with up graded springs
tfs stg 1 cam maybe some thing a little bigger
93' cobra manifold
24lbs with matching mass air maybe 30lbs because of the nitrous all ready have 6 of them of a super coupe
65mm throttle body
snyper nitrous kit with a foggermade by N.O.S maybe a 100 shot 125shot
255 walbro fuel pump
gears 4.10
suspension drag lauch kit with air bag
90/10 struts
50/50 shocks
sub frame connectors
later in the future tubular k-member
4th Gear Member
Joined: Oct 2007
Posts: 1,049
From: Houston, TX
RE: cam suggestions
ORIGINAL: 1995mustang818
sounds good well this is my plan
gt-40 heads with up graded springs
tfs stg 1 cam maybe some thing a little bigger
93' cobra manifold
24lbs with matching mass air maybe 30lbs because of the nitrous all ready have 6 of them of a super coupe
65mm throttle body
snyper nitrous kit with a foggermade by N.O.S maybe a 100 shot 125shot
255 walbro fuel pump
gears 4.10
suspension drag lauch kit with air bag
90/10 struts
50/50 shocks
sub frame connectors
later in the future tubular k-member
sounds good well this is my plan
gt-40 heads with up graded springs
tfs stg 1 cam maybe some thing a little bigger
93' cobra manifold
24lbs with matching mass air maybe 30lbs because of the nitrous all ready have 6 of them of a super coupe
65mm throttle body
snyper nitrous kit with a foggermade by N.O.S maybe a 100 shot 125shot
255 walbro fuel pump
gears 4.10
suspension drag lauch kit with air bag
90/10 struts
50/50 shocks
sub frame connectors
later in the future tubular k-member
3rd Gear Member
Joined: Aug 2007
Posts: 808
From:
RE: cam suggestions
all their hydrualic rooler cams are 299$ i belive....not bad for what i seen some other hydrualic roller cams going for...try and stay away from alphabet cams they are old technology..i know anderson...lunati...comp cams make good stuff
