guys running with Flow Tech Headers... what kinda mid pipe are you running to match that damn 3 bolt flange... i can't find a mustang specific mid pipe to mate to the 3 bolt flange...

 

Find a good custom exhaust shop that can do mandrel tube bends and have them fix you up. Because primary tube lengths differ so much from header to header. I doubt you find a true bolt on kit.

 

I'm running the flowtech x-pipe

 

what diameter pipes? i need a 3 inch with the 3 bolt flange to the headers and a 2 bolt flange out back

 

flowtech makes both an h and x exactly for thier long tube headers. they have a reducer on them to bring them from 3" to 2.5" part#'s are big-53628flt for the x and big-53608flt for the h from summit racing. i also wouldnt use a gasket i would use high temp silocone (orange stuff) because when i ran those headers the collectors always leaked until i just started using the silocone.

 

why make a reducer that sounds retarted to have a larger collecter into a smaller pipe.

 

ive got a fox flowtech h pipe in my garage... come pick it up and its yours!