hey everyone, just picked up a 78 mustang 2 , it has a 302 in it from an 82, its got a crane cam and higher compression pistons and a Holley 650, im not sure what it has for rear end, im assuming stock mustang 2 rear end. but the guy built it from ground up needs a paint job. but i was just wondering what kind of hp and torque am i looking at with those mods(as i dont have a dyno readily available) thanks

 

4 speed btw

 

and i forgot its also got headers

 

and another thing, what else could i do that would be bolt on besides forced induction or heads , this is going to be my beautiful weekend car and ha i just wanted to let everyone know i just made the switch from rice! ha

 

Welcome! ...what part of NY??

 

around kingston

 

without knowing the actual compression ratio, the specs of the cam, the intake, etc etc its really hard to give you a number. i'll take a random guess and say probably 250 - 275 @ the flywheel.

 

thank you sir, im actually not sure of the compression, or the specs of the cam, its an edelbrock intake manifold

 

Welcome to the forum. Good to have another II member.