4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

quarter mile times

Thread Tools
 
Search this Thread
 
Old May 28, 2009 | 06:18 PM
  #71  
lilcrate's Avatar
lilcrate
4th Gear Member
 
Joined: May 2009
Posts: 1,030
From: MO
Default

Does anyone have an idea what i would run, i am new to this, my car is auto, mods should be listed in signature. I live in MO, not sure of evelation. Also is there much messing up you can do with an auto?
Old May 28, 2009 | 07:35 PM
  #72  
boduke0220's Avatar
boduke0220
6th Gear Member
 
Joined: Mar 2007
Posts: 5,183
From: Yadkin, Nc
Default

if you can drive i dont see why you couldnt get mid 13's. does your car have a shift kit/ shift points adjusted on the tune?
Old May 28, 2009 | 10:33 PM
  #73  
Kmelfi11's Avatar
Kmelfi11
4th Gear Member
 
Joined: Dec 2007
Posts: 1,787
From: New Jersey
Default

i ran 12.8 (rest in sig) and since then put some more money into suspension with 3.73's i hope to get it down to 12.5 and then swap to 4.10's. coil overs go on tomorrow!

old thread... my b

Last edited by Kmelfi11; May 28, 2009 at 10:36 PM.
Old May 28, 2009 | 10:39 PM
  #74  
Willy Mo's Avatar
Willy Mo
1st Gear Member
 
Joined: Aug 2008
Posts: 53
Default

Originally Posted by lilcrate
Does anyone have an idea what i would run, i am new to this, my car is auto, mods should be listed in signature. I live in MO, not sure of evelation. Also is there much messing up you can do with an auto?
I also live in MO! I ran a 13.50 but i have a stick car. you probably run 13.8 ish on street tires. where you from?
Old May 29, 2009 | 01:01 AM
  #75  
Skeetdog's Avatar
Skeetdog
1st Gear Member
 
Joined: Apr 2009
Posts: 64
From: Texas
Default

Best slip I could find when I went to the track a lot. O/R H-pipe and Flowmaster Cat-back was a 13.578 at 101.46.
Could never get a good 60', but on this run it was a 2.034.

Skeet
Old May 29, 2009 | 10:00 AM
  #76  
72MachOne99GT's Avatar
72MachOne99GT
2010 Blue Ball Award Recipient
 
Joined: Dec 2004
Posts: 7,907
From: Eskimo Village, Indiana *No Igloo*
Default

Originally Posted by Skeetdog
Best slip I could find when I went to the track a lot. O/R H-pipe and Flowmaster Cat-back was a 13.578 at 101.46.
Could never get a good 60', but on this run it was a 2.034.

Skeet
Thats um....pretty amazing.....
Old May 29, 2009 | 02:21 PM
  #77  
99GTvert's Avatar
99GTvert
is my username.
 
Joined: May 2006
Posts: 13,808
From: Earth
Default

Nice time. Which track was it?
Old May 29, 2009 | 02:59 PM
  #78  
Skeetdog's Avatar
Skeetdog
1st Gear Member
 
Joined: Apr 2009
Posts: 64
From: Texas
Default

Originally Posted by 99GTvert
Nice time. Which track was it?

If you are referring to my time, thanks. Houston Raceway Park in December 2002, car probably had maybe 12,000 miles on it.
An old friend had skills, DRs, O/R H, Welded in Flows, 3.73's, no air silencer pulled a - 12.915 @ 105.97 (2000 GT) 60' - 1.751 Naturally Aspirated. On gas pulled a 12.264 @ 113.41 (2000 GT, N2O - old motor) 60' - 1.887

Last edited by Skeetdog; May 29, 2009 at 03:09 PM. Reason: Added info
Old Jun 2, 2009 | 02:00 PM
  #79  
lilcrate's Avatar
lilcrate
4th Gear Member
 
Joined: May 2009
Posts: 1,030
From: MO
Default

Originally Posted by ***** Mo
I also live in MO! I ran a 13.50 but i have a stick car. you probably run 13.8 ish on street tires. where you from?
That would be cool, I am near Saint Louis in Cedar Hill. I just did standard tuning with the tuner, not sure what i am doing in custom all though i wish i knew what to do. Thanks for the input.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
Sep 20, 2022 01:04 AM
Roger Mabry
Archive - Parts For Sale
4
Jun 15, 2016 08:27 AM
Tyoung68
New Member Area
7
Aug 25, 2015 04:31 AM
kdryan
The Racers Bench
3
Aug 22, 2015 02:14 PM
Displ8cement
Texas Regional Chapter
0
Aug 13, 2015 12:37 PM




All times are GMT -5. The time now is 10:55 PM.