4 Cylinder NA and Turbo This section is for questions pertaining to stock or modified 4 cylinders, including the performance 2.3L applications

Cluster Accessories Issue

Thread Tools
 
Search this Thread
 
Old Sep 11, 2009 | 12:19 AM
  #1  
Albert88LX's Avatar
Albert88LX
Thread Starter
 
Joined: Sep 2009
Posts: 2
From: California
Default Cluster Accessories Issue

When I try to start my 88 LX up, none of the cluster lights come on and I'm unable to crank the engine. I'm wondering if I've got a ground problem or if there is a another fuse hidden somewhere other than the panel on the driver's side.

I recently put a new front bumper, headlights, and front left fender apron on. Also ,the hazard lights and turn signals are not working but the headlights do work. It was running until I did the body work.

Thanks for any help you can give.
Old Sep 11, 2009 | 06:49 PM
  #2  
mg man 75's Avatar
mg man 75
5th Gear Member
 
Joined: Oct 2006
Posts: 2,171
From: Kentucky
Default

Welcome to the forum. I hope this helps. And since new if If explain too simple sorry. The cluster lights, fuel , oil etc. on the lower right of dash pod. It is only used on the GT from what I read. I have them on mine but mine is hodge pod of parts so that is explainable. Or are talking about the dash lights? Now on the start problem. Sounds like a ground wire off. Is the starter solinoid mounted must be to work. Start looking for any black wires not mounted to body. That is usually a ground wire. Hope this helps. If unsure on some wiring where they go. Mine is a same and I can look and see if would help. Maurice

Last edited by mg man 75; Sep 11, 2009 at 06:52 PM. Reason: spelling
Old Sep 12, 2009 | 01:24 AM
  #3  
Albert88LX's Avatar
Albert88LX
Thread Starter
 
Joined: Sep 2009
Posts: 2
From: California
Default

To clarify my problem, when I try to start the car the instrument panel doesn't light up at all. The warning lights should flash for a second when the car starts but I'm getting nothing. That's what leading me to think it's some kind of electrical problem. I'm just hoping that somebody might have had this problem before and could give me some pointers to troubleshoot it.

Thanks Maurice for the ground issue idea. I'm going to check everything tomorrow. I'll let you know if it works.
Old Sep 12, 2009 | 02:45 PM
  #4  
dreamer1uk's Avatar
dreamer1uk
3rd Gear Member
 
Joined: Feb 2008
Posts: 877
From: IL
Default

Hey,

Does the starter motor crank over the engine at all when you turn the key to the start position? Or do you have a no crank condition?
Old Sep 14, 2009 | 01:22 PM
  #5  
sleeper_inc's Avatar
sleeper_inc
6th Gear Member
 
Joined: Sep 2006
Posts: 9,991
From: Regina Beach, Sask
Default

Clean all your connections to the battery and the starter solenoid. If you get a click when you turn the key and nothing happened's you have a bad connection
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cr620
V6 (1994-2004) Mustangs
2
Oct 3, 2022 10:18 PM
Thunderball
4.6L (1996-2004 Modular) Mustang
15
Nov 22, 2015 11:49 PM
chrisdbassplayer
2010-current S197 Appearance Section
4
Oct 13, 2015 06:53 PM
Bokeo
Street/Strip
6
Oct 10, 2015 08:28 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM




All times are GMT -5. The time now is 09:35 PM.