Post pictures of battery cutoff switches
5th Gear Member
Joined: Feb 2007
Posts: 3,736
From: St. Charles Il, and ISU
Put mine next to the licens plate, just has enough room.... Had to file a small part of the licens plate down but nothing to bad....
Then i painted it red so it was easier to see. A little hard to see, dont have any pics with the license plate and bumper on, but that is pretty much right next to the licens plate in the center
Then i painted it red so it was easier to see. A little hard to see, dont have any pics with the license plate and bumper on, but that is pretty much right next to the licens plate in the center
The Rogue Mod
Joined: Feb 2006
Posts: 21,918
From: Maryland Sucka's!!
J, go to a local j/y and buy a flip down bracket off of like an early 80's Caprice Classic, Monte etc. Any older GM that had the tank fill behind the licence plate.
Then I took some short pvc that I got from Home Depot along w/ some longer screws and screwed it right into where the tag would normally screw into. It was very simple to do.
Then I took some short pvc that I got from Home Depot along w/ some longer screws and screwed it right into where the tag would normally screw into. It was very simple to do.
The Rogue Mod
Joined: Feb 2006
Posts: 21,918
From: Maryland Sucka's!!
Thread
Thread Starter
Forum
Replies
Last Post
