P0320 engine code????
#1
P0320 engine code????
Hey guys: I had the code P0320 coming up, I replaced the iac valve and gasket, but the car still won't start. It first started to have a rough idle and it would die unless you gave it some gas, but now it won't even start.
#2
Did you reset the ECU? If not it's probably retained memory and still thinks the problem exists. Reset it with a diagnostic tool or you can disconnect the battery for like 10 minutes to do it as well, I think. If you've already tried one or both of those, then open a beer and wait for someone else who knows more than me to reply.
#4
^+1, here's what the shop manual says about P0320.
Nothing to do with the IAC--check the plug wires and coil packs for arcing...
Nothing to do with the IAC--check the plug wires and coil packs for arcing...
Last edited by cliffyk; 12-28-2009 at 09:52 PM.
#5
PO320 code making my driving life miserable
The check engine code on my 1999 35th edition Mustang come up off and on going on 9 months now. I have done numerous repairs (O2 sensor, crankshaft sensor, camshaft sensor, new computer/flashed the keys, gas filter, gas pump inside gas tank, gas seal, etc.) all of this to no avail. The car coughs and sputters, jumps and leaps and does not have enough "steam" to get up over a hill. Other times it cranks just fine and I can drive around like "normal" for weeks at a time. What the heck do I need to do to fix this once and for all? I am at a loss right now . . .
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM
zanemoseley
2005-2014 Mustangs
6
09-06-2015 12:58 PM