what carb and intake manifold
#1
what carb and intake manifold
so far this is whats planned, a had a couple questions about carb/intake
my buddy suggested a 750cfm with this setup,
what do you guys think for a carb and intake manifold?
302 block std bore
10:1-10.5:1 compression
ported gt40 heads
x303 cam 1.6 rockers
longtube headers
this is going on a built aode with probably a 2800/3000 stall
my buddy suggested a 750cfm with this setup,
what do you guys think for a carb and intake manifold?
302 block std bore
10:1-10.5:1 compression
ported gt40 heads
x303 cam 1.6 rockers
longtube headers
this is going on a built aode with probably a 2800/3000 stall
Last edited by la.douche; 01-08-2011 at 07:02 AM.
#4
holley reccomended at weiand 8020
http://www.amazon.com/Weiand-8020-St.../dp/B000CQDJ8M
and street avenger 670
http://www.amazon.com/Holley-0-80670.../dp/B00029J4J2
what do you guys think?
http://www.amazon.com/Weiand-8020-St.../dp/B000CQDJ8M
and street avenger 670
http://www.amazon.com/Holley-0-80670.../dp/B00029J4J2
what do you guys think?
#5
Edelbrock RPM or Vic Jr. depending on cam/application. And a 750 will work fine, just get something with good boosters, not some crap old school Holley, but something newer like a Demon, Quick Fuel etc.
#10
Personally I think the 750 is too big also. I also think that the Victor Jr intake is too big for the 302 also. I would go with Edelbrock performer rpm and a holley 650 double pumper. Nice and simple but effective. Its very easy to overcarburete