View Single Post
Old 06-30-2013, 03:31 PM   #2
adrnlnjnky700
2nd Gear Member
 
adrnlnjnky700's Avatar
 
Join Date: Dec 2011
Vehicle: 1989 Mustang Notchback
Location: Connecticut
Posts: 272
Default

Are you getting power at the starter solenoid? post on the top. and is that little boot connector connected to that top post. Did you remember the ground on the back of the drivers side head?
__________________
89 stang(5.0 swap)V3 s-trim, trick flow upper and lower, comp cam xe270HR cam, twisted wedge heads, comp cam ultra gold roller rockers, bbk 75mm throttle body, mallory distributor, eibach pro plus kit, tubular control arms, subframe connectors, long tube headers, 4.10's, 42lb injectors, 90mm MAF, MSD 6A and Blaster 3 Coil, Ford racing wires, Walbro 255lph and inline walbro 255, SCT chip.
411hp/355tq
adrnlnjnky700 is offline   Reply With Quote