90 5.0 cranks but no fire
#1
90 5.0 cranks but no fire
Got a 90 5.0 that will crank over but not fire, I have fuel and the icm tests good. But I'm still not getting spark, tested for power at each pin on the module and coil everything has power as it should. I don't know what else to check
#2
Took me awhile but I found this that helped me out.
http://sbftech.com/index.php/topic,5...1.html#msg6501
http://sbftech.com/index.php/topic,5...1.html#msg6501
#5
For the trouble of replacing it, add about 20 bucks and you can just get a reman dizzy .
#6
20 busk for a reman? Where did you get one of those? I'm paying 60 for a reman is I wind up rebuilding mine 20 bucks for the sensor on rock auto. Just a pain to rebuild the dist.
#7
#10
I have the same prob. on my 95 GT. I have a no cold start. I can start it if I work on it until it starts and she runs good after it warms up. However after I let it sit for over 3 hrs I right back to no cold start??