Rocker panel question
#2
This manual for the Roush kit shows how to remove the factory molding: http://www.roushperformance.com/part...009-401337.pdf
#4
Maybe I should ask this question. If I get the moldings off the rocker panels, will this allow me access to the inside of the panels? After it rains, I can hear water sloshing around. I'm assuming this is in the rocker panels. After the rain stops, it takes days for the water to stop dripping out of the drain slots. I've checked them with a piece of wire and they appear to be open. what sholld I do next?
#6
So, looking at the car, I noticed it has a cool rake with the front lower than the back. I drove it up on on some ramps to get the rocker panels slanted front higher than the back and, voila, the trapped water poured out the drains. No more sloshing. If you can park your car with the front end up hill, you won't need ramps.
Last edited by jimbir; 05-10-2014 at 09:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
treesloth
New Member Area
4
09-28-2015 07:03 AM