What are you working on?
What are you working on?
Originally Posted by 88-347stroker
Hey Tribe ,is that stang green stage 3 ,any photos
Originally Posted by Zodiac
Suck about the brakes on the RS3, the color looks amazing!
Anyways, he gets the front parts on this morning and when he goes to do the rear brakes, he finds out that one of the calipers is so rusted that the piston can't be pushed back in with the tool than screws the piston back in. So now, he's on his way to Crossroads Ford to (hopefully) pick up a new caliper. But the real b!tch of it is he'd have to buy another $100 G2 caliper paint kit to paint the new caliper to match the others. To say that's been upset with how things have gone since taking delivery of the car would be a major understatement. But hopefully he'll be able to get everything resolved today and be able to finally drive the car for the first time in about 10 days.
Ok guys deal is set , this should in the driveway Monday
http://capitalfordrockymount.com/veh...coupe-t152107a
http://capitalfordrockymount.com/veh...coupe-t152107a
6th Gear Member
I would need to know what size pulley is on it. Since it's an RS3 I would imagine it has the 82mm pulley, but one way to know for sure is when you pick it up.......Wait until you are in 3rd gear, 3000RPMs....drop the hammer and look at the boost gauge. If it say 10psi then you have the 82mm pulley. With that said, get the 82mm pulley (If it's not already on the car), ID1000 injectors, JLT CAI and a VMP plug-n-play Boost-A-Pump. You'll also need a tune and Dan at Pro Dyno is the man. With those mods you will be in the mid 600s. After that you need to get an MGW shifter and upgrade the suspension...
Ok guys deal is set , this should in the driveway Monday
http://capitalfordrockymount.com/veh...coupe-t152107a
http://capitalfordrockymount.com/veh...coupe-t152107a
Happy since you will be getting a sweet car.
Sad since you will have a new full time job of keeping it clean