When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
pics of how bad it is?? is is just rust scale or full blown holes?
I haven't removed the windshield yet so I don't know the extent. With the windshield trim removed I see one area near each lower corner, above 3" inboard of the corners. What I can "see" looks like scale on one side and maybe a hole on the other once I start getting into it
if its just scale then id sandblast the area with a spot blaster. then wipe it with some alum based body filler(all metal, metal to metal) block it, prime with it epoxy prime sandable primer then topcoat