Just scored a '88 302 EFI motor complete...
02-05-2007, 11:57 PM
#1
2nd Gear Member
Thread Starter
Join Date: Jul 2006
Location: Wiscon-brrrrrr-sin
Posts: 490
Just scored a '88 302 EFI motor complete...
I've been looking for a while now and finally found what I was looking for... a 1988 302 EFI motor complete with harness & computerfor $350. Now I have a roller motor complete that I can shoehorn into my wife's '65 Mustang!!!
it will slide in with ease
02-06-2007, 01:44 AM
#5
2nd Gear Member
Thread Starter
Join Date: Jul 2006
Location: Wiscon-brrrrrr-sin
Posts: 490
RE: Just scored a '88 302 EFI motor complete...
James,
I just cruised your website and found that there will be a lot of time consuming stuff that needs to be done... Not a big deal but I'll get the motor and harness, headers, gas tank and misc parts all together before pulling the 289. I'll have her drive it in the present configuration until later this summer, by that time I'll be ready to convert it to 5.0EFI. Good info on your site - thanks! Glad I'm not the first one to do this...
I just cruised your website and found that there will be a lot of time consuming stuff that needs to be done... Not a big deal but I'll get the motor and harness, headers, gas tank and misc parts all together before pulling the 289. I'll have her drive it in the present configuration until later this summer, by that time I'll be ready to convert it to 5.0EFI. Good info on your site - thanks! Glad I'm not the first one to do this...
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
