69FECoupe

Nice car 69mach, is that Meadowlark yellow?

69mach1377

Thanks,
Grabber yellow in 71', I think yellow in 70'

tornado

hey i have a tranny ??, is the C4 transmission in a 6 banger the same as the 8, someone told me they where interchangeable and that all i had to do is change bell houseing and starter

roundman

not sure that the 6 cyl tranny was rated for the same amount of torque as the V-8 tranny was, talk to somebody at a local tranny shop and they can tell you what's what with the C-4 trannys. good luck with the swap, it's lots of work but will be worth it when you're done. I would replace all the old brake lines with new ones while I was at it too, can't be too safe you know!

picos68stang

Is your V8 parts car also a 65? If so, why not strip the 6 cyl and put its body on the V8 frame. Hell that would be easier than coverting your six to an 8. If comptemplated changing my six to an 8 but it so much friggin work I would never have time to do it.

dodgestang

You are aware that the mustang is a unibody vehicle that does not possess a 'frame' that can be removed right?

tornado

the only reason iam doing this swap is because my parts car is a piece of junk and it has cancer, and i was going to junk it so i decided to convert my 6 cil. car to a 8

dodgestang i know my car is a unibody i never said anything about taking the frame off

thanks guys!

Soaring

Seen one C-4, seen em' all. No difference.

tornado

yeah but are they interchangeable, because i know that the bellhousing's aren't the same.

tornado

I NEED HELP!!!

strut rod and lower a arm wont fit it seems to be a inch off from where the a arm mounts to the body please help!![]