Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Got an Electrical Question

Thread Tools
 
Search this Thread
 
Old 02-25-2005, 02:20 PM
  #1  
Wessy
1st Gear Member
Thread Starter
 
Wessy's Avatar
 
Join Date: Feb 2005
Location:
Posts: 97
Default Got an Electrical Question

Does anyone happen to know where thses conector are in the car. I've found a few, but not with the right colored wires. I'm looking for the wire that goes from the ignition switch to the primary coil winding (or + on the coil). Thanks!



Full size image is here
Wessy is offline  
Old 02-26-2005, 07:31 PM
  #2  
Wessy
1st Gear Member
Thread Starter
 
Wessy's Avatar
 
Join Date: Feb 2005
Location:
Posts: 97
Default RE: Got an Electrical Question

Anyone?
Wessy is offline  
Old 02-26-2005, 08:44 PM
  #3  
mach12004
 
mach12004's Avatar
 
Join Date: Dec 2004
Posts: 18
Default RE: Got an Electrical Question

My 69 mach 1 connector is in the middle of the firewall.
mach12004 is offline  
Old 02-26-2005, 09:01 PM
  #4  
67coupe
2nd Gear Member
 
67coupe's Avatar
 
Join Date: May 2004
Location:
Posts: 349
Default RE: Got an Electrical Question

My guess is that "C" is at the firewall under the hood near the master cylinder and the other is under the dash near gauge cluster.
67coupe is offline  
Old 02-26-2005, 11:28 PM
  #5  
69FECoupe
3rd Gear Member
 
69FECoupe's Avatar
 
Join Date: Apr 2004
Location:
Posts: 686
Default RE: Got an Electrical Question

I think I answered this the other day. You posted a picture of two plugs at the firewall under the hood. The three connector plug is for the coil, oil pressure and water temp. The four connector plug goes to the nuetral safety switch and back-up lights.
69FECoupe is offline  
Old 02-27-2005, 02:21 AM
  #6  
Wessy
1st Gear Member
Thread Starter
 
Wessy's Avatar
 
Join Date: Feb 2005
Location:
Posts: 97
Default RE: Got an Electrical Question

ORIGINAL: 69FECoupe

I think I answered this the other day. You posted a picture of two plugs at the firewall under the hood. The three connector plug is for the coil, oil pressure and water temp. The four connector plug goes to the nuetral safety switch and back-up lights.
Sorry I didn't realize these were the same connectors. I have different color wires than what the diagram shows. Thought maybe they were somewhere else. Thanks!
Wessy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chrisdbassplayer
2010-current S197 Appearance Section
4
10-13-2015 06:53 PM
UrS4
S197 Handling Section
1
09-30-2015 10:13 AM
treesloth
New Member Area
4
09-28-2015 07:03 AM
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM



Quick Reply: Got an Electrical Question



All times are GMT -5. The time now is 03:46 AM.