Dash pad change on '65
Been having a small problem with geting a new dash pad to fit on a '65. When I bought the car a few months back, it had a new dash pad already "installed" minus the trim pieces and mounting screws. Basically just pushed over the steel dash. I ordered all the mounting trim,screws,etc. but then discovered that the holes in the pad and dash won't line up on the bottom. Lacks about 1/4 inch or so. I then also noticed that the pad is actually for a '66 model, and don't know if this makes a difference. There is also a couple screws embedded in the front bottom of the pad that appear to have nothing on the metal part of the dash to attach to.