Super Stock Mustang
#1
Super Stock Mustang
My car was featured in Modified Mustangs & Fords
http://www.mustangandfords.com/featu...g-super-cobra/
The engine has been out a long time. Tomorrow I will take the bellhousing and starter to my engine builder so he can install it on his dyno Monday. Tuesday or Wednesday we should be making a few dyno pulls. The engine is for B/SA with cast iron heads and intake.
http://www.mustangandfords.com/featu...g-super-cobra/
The engine has been out a long time. Tomorrow I will take the bellhousing and starter to my engine builder so he can install it on his dyno Monday. Tuesday or Wednesday we should be making a few dyno pulls. The engine is for B/SA with cast iron heads and intake.
#7
We did not have a very good dyno session. We only got to make three good pulls before the water brake broke on the dyno. The plan was to compare the stock Cobra Jet 735 with the Quick Fuel replacement. We made the three pulls with the 735. 493 HP, 500 HP and 502 HP all around 5900.
#8
I need to get my daily driver up on the dyno. It's an FE 428 (.040 over) with the 60069 Edlebrock 72cc aluminum heads, 530 lift cam and two Holley 4160 600cfm carbs.
Only thing that I do know about the power is that it has more torque at 800rpm than my 302 did at 6200 rpm.
I love FE motors!
Only thing that I do know about the power is that it has more torque at 800rpm than my 302 did at 6200 rpm.
I love FE motors!