$1500 to spend, what combos will help my ET's the most
#1
$1500 to spend, what combos will help my ET's the most
So its nearing the end of the summer, out of the money ive made ive saved up $1500 to blow on my mustang. what is everyones suggestions?
o and i dont want LT's
my ideads were port job, vpr cams, maybe shorties but idk about installation costs
o and i dont want LT's
my ideads were port job, vpr cams, maybe shorties but idk about installation costs
#6
i vote for Gears (4.10's) and drag radials. the gears should run you about $500 installed (parts and labor) and as for tires, brenspeed sells a mickey thompson e/t street wheels/tires package for $600 i think. then take the left over $ and go to lmperformance.com and get the j&m lca's and relo brackets and adjustable uca.
those mods will drastically reduce your e/t's at the track. the tires are the most important out of all of them in my opinion.
those mods will drastically reduce your e/t's at the track. the tires are the most important out of all of them in my opinion.
#7
While an aluminum driveshaft is another idea its about $700 bucks but install is cheap. It would be nice because it will benefit you stoplight to stoplight, whereas wheels/tires will only be used at the strip. Savings will range from 1-2/10ths. I don't know what the gain from 3.55's to 4.10's is in the 1/4, but be mindful of the hwy mileage drop with that mod, which would only really be relevant if this car is your DD or you do a lot of driving.
Last edited by white_lightning; 08-01-2009 at 08:07 PM.
#9
Gears are a must (be a man and get 4.10's)
Spray is probably the most obvious answer in your case. At least get the gears, as it's a performance mod that you can use on the street or the strip to have fun.
Spray is probably the most obvious answer in your case. At least get the gears, as it's a performance mod that you can use on the street or the strip to have fun.