1988 Ford Mustang GT Hatchback - "Andariel the Demon DD"
#21
#22
Just purchased Edelbrock High Flow Water Pump, all gaskets, 180 thermostat, Fluidyne 3 core radiator, and Flexilite Extreme Black Magic fan... 3300 CFM of breeze to keep my pony cool i hope...
#23
Well I got started when they all arrived! Lots of boxes!
Pulled the Box within a box out... Looking good!
Got her all jacked up and ready!
Pulled the fan and radiator...
Old pump...
Engine shot where the pump goes... I see missing gasket...
New Edelbrock high Volume Water Pump installed!
Flex i Lite Black Magic Extreme Fan Compared to old fan... Not sure what the old one was...
Shiny Aluminun Brackets installed
Fluidyne Radiator! Super sexy!
Fan Installed on radiator. Fantastic fit!
Unit Installed! I have even more clearance than before! Runs super fantastic! I had a hole in my lower hose so I replaced it with a Gates Hose and it should be good now! No leaks!
I stay at this temperature or a tad lower while beating the snot out of the car, with the AC on full blast in 90+ degree heat! I also just parked it, left it running, and idled it for 20 + minutes and it still didnt move. That fan moves a super serious amount of air...
I even found a buddy to park next to!
So the results are in... This setup is off the hook. I highly recommend it to everyone!
Pulled the Box within a box out... Looking good!
Got her all jacked up and ready!
Pulled the fan and radiator...
Old pump...
Engine shot where the pump goes... I see missing gasket...
New Edelbrock high Volume Water Pump installed!
Flex i Lite Black Magic Extreme Fan Compared to old fan... Not sure what the old one was...
Shiny Aluminun Brackets installed
Fluidyne Radiator! Super sexy!
Fan Installed on radiator. Fantastic fit!
Unit Installed! I have even more clearance than before! Runs super fantastic! I had a hole in my lower hose so I replaced it with a Gates Hose and it should be good now! No leaks!
I stay at this temperature or a tad lower while beating the snot out of the car, with the AC on full blast in 90+ degree heat! I also just parked it, left it running, and idled it for 20 + minutes and it still didnt move. That fan moves a super serious amount of air...
I even found a buddy to park next to!
So the results are in... This setup is off the hook. I highly recommend it to everyone!
#26
Thanks man!
Yeah I know! Little by little man. I am selling off all my honda crap and sayinf forget my rwd v8 honda project and focusing on this bad boy...
I am just sad that she is sooooo slow! and very uncomfortable to ride in haha. My wife complains. Our roads here are absolute garbage so you really feel it. I am thinking of getting some Eibach drag springs because I know they are pretty soft for launches and ride super well.
Yeah I know! Little by little man. I am selling off all my honda crap and sayinf forget my rwd v8 honda project and focusing on this bad boy...
I am just sad that she is sooooo slow! and very uncomfortable to ride in haha. My wife complains. Our roads here are absolute garbage so you really feel it. I am thinking of getting some Eibach drag springs because I know they are pretty soft for launches and ride super well.
#27
Your getting it looking good man , it takes some serious patients to rip the entire inside out like you did, I did my 94 and put new carpet in, man what a chore ..
but who ever welded those sub frame connectors in there has no business welding lol . Id get those redone if I was you .
I been welding for 20 years , I could do a better job with a little 110 wire welder from harbor freight lol .
but who ever welded those sub frame connectors in there has no business welding lol . Id get those redone if I was you .
I been welding for 20 years , I could do a better job with a little 110 wire welder from harbor freight lol .
#28
Your getting it looking good man , it takes some serious patients to rip the entire inside out like you did, I did my 94 and put new carpet in, man what a chore ..
but who ever welded those sub frame connectors in there has no business welding lol . Id get those redone if I was you .
I been welding for 20 years , I could do a better job with a little 110 wire welder from harbor freight lol .
but who ever welded those sub frame connectors in there has no business welding lol . Id get those redone if I was you .
I been welding for 20 years , I could do a better job with a little 110 wire welder from harbor freight lol .