You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
The kit is used, but has not seen much use. I purchased it new in fall of 07 and it has had about 35lbs of nitrous through it in that time. I have all the parts that originally came with the kit, all of the jets (75, 100, and 125 jet pairs), the wiring that comes with the kit hasn't even been cut - I coiled the extra.
There's nothing wrong with the kit, I just don't need it any more!
I didn't buy any extras, so what you see on Zex's site is what I have:
-Controller with fuel pressure safety switch
-10 lb. bottle
-Jets and nozzle
-All stainless steel lines
-Switch, wiring and mounting hardware (system is activated by TPS voltage - AKA WOT switch)
The only negative I can see is the finish on the bottle is a little scuffed from the mount that comes with the kit. Pictures available upon request - I'm just not feeling well this second and don't want to get out to take some pictures haha
Will this work on my V6, I mean the connections and all, and is this everything included?
It will work just fine... everything is included and was left as is. You could follow the instructions that came with the kit and install it without hitch.
As far as electrical connections are concerned, there are only a couple...
Positive and negative which runs through the switch (with a fuse, also already there), and one wire connects to the signal wire on your TPS - for the WOT switch. I am not sure which wire you need to tap but I can find out using my friend's 00 v6.
Apart from that you need to get fuel to it, there is a kit zex has which lets you use the schrader valve on your fuel rail... I don't have it - it didnt come with my kit and my fuel rails dont even have a schrader valve. You can also cut and put a t-fitting into the fuel line. SOunds scary but it isn't bad.
So yes, it will work just fine, everything is here, or I could help you locate extras to make it simpler. All connections will be simple Excuse any typos... typed this up from my phone.
__________________
2004 Black Premium GT (5spd)
-Procharger P-1SC intercooled
-Moates.net Quarterhorse
-Tuned with Binary Editor
Pictures are here! As I said, the kit is still in the car but as soon as someone shows some serious interest I'll remove it and take better pictures simply by request.
__________________
2004 Black Premium GT (5spd)
-Procharger P-1SC intercooled
-Moates.net Quarterhorse
-Tuned with Binary Editor
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
S> Zex Wet Nitrous Kit
Excuse any typos... typed this up from my phone.
