what is this?
08-18-2003, 11:00 PM
#1
1st Gear Member
Thread Starter
Join Date: Jul 2003
Location: United States
Posts: 59
what is this?
what is an FMU and what does it do? also if i were to get my chip burnt from diablo would i be bad if i had them burn it for shorty headers, x pipe and cat back before i put them on?</P>
08-21-2003, 12:57 AM
#8
I ♥ Acer
Join Date: Jul 2003
Location:
Posts: 11,394
08-21-2003, 09:40 PM
#9
1st Gear Member
Join Date: May 2003
Location: United States
Posts: 90
what is this?
Before everyone runs out and buys a Tweecer thinking you're going to pick up big power, you're wrong. Number 1 you need lots of knowledge regarding the stock computer fuel maps and what they do before adjusting anything. Wanna fry your motor? Go for it. Second, you need a wide band O2 to really data log WOT air/fuel information. Stock O2's only measure stoic which is helpful for idle only. Unless you really know how to "tweek" with fuel maps. DON'T MESS WITH IT!!
08-22-2003, 12:54 AM
#10
I ♥ Acer
Join Date: Jul 2003
Location:
Posts: 11,394
what is this?
in away your right..on a non s/c your not going to pick up a ton of hp maybe 10-20hp...it's more of an investment as you can put 4 different car's stuff on it...with this as any other gofast parts you added and learn it slowly...when you have access to a dyno great things came happens...I have seen 75hp+ ...would you trust a guy who never seen you como only goes by what other have done is still a shot in the dark..and 50-$100 per reburn adds up fast .. look at all the pro-m's for sale...it's a great tool..but use caution and make very small changes but you can see them in real time..
you can have a track setting.street race setting,cruise settings..you get the picture
you can have a track setting.street race setting,cruise settings..you get the picture