03BlackBeauty

I just wanted to pick everyone's brain as much as I can before I do this and have a paperweight sitting in the driveway. I have a 03 GT with stock internals, L/T headers, O/R H-pipe, Borla ATAK exhaust, 78 MM plenum/TB and a procharger with all the supporting mod's. I want to run a 75 wet shot with a plate kit. Will the stock internals and the rest of the motor be able to handle this set up or am I going to blow the motor apart with it. I might also put a cam in it at a later time, I'm not too sure yet. Any helpful advise on this would be greatly appreciated. Also with that what kind of numbers would I be looking at HP and time wise?

03BlackBeauty

Anyone??

bronxbomba63

How much are you making currently? I've heard constantly that the stock internals are good up to around 400hp. If you're making close to this, I would really consider forged internals.

bluebeastsrt

Assuming your making 330ish to the wheels on boost you'll be right near 400HP on the spray. Why not just shoot for more power with the blower?

Kyle@ROUSH

I think you might be pushing your luck going that route. For what it cost to set the nitrous up "right" I'd look into sticking with the blower.