Got truck, parting most of car
#1
Got truck, parting most of car
I got a truck and am selling off some stuff from my car. It's a 97GT.
Bassani BX catted X-pipe. $100
BBK o/r H-pipe for 96-98 Cobra sold
T45 tranny from 98 Cobra with about 65k on it. No grinding, always has shifted smooth for me. $450
I also have 2 non-pi intakes with the aluminum crossover. Asking $100 each.
Alternator $50
Starter $30
Radiator from 99 Cobra $60
Airbags, they are gray. $60 for drivers side, $50 for passenger side. drivers side pending
Tail lights. $50
I have the mach stuff without any speakers (the box and door tweeters) $25
There's a motor in my driveway with about 145k on it with a spun rod bearing. gone
A-pillar 3 gauge pod. $15
Steeda shift **** gone
Aftermarket clear head/corner lights. $30
Charcoal steering wheel in decent shape. $40
Misc gray interior panels - let me know what you need.
There's some other various stuff so if you need somethin just ask and I may have it. I'll try to get pictures of all this stuff when I get off work. Please email me at jmmorgan82@gmail.com, as I don't get on here too often.
I'd prefer pickup but I can ship most of this stuff out (not the tranny).
h-pipe got some mist on it, caused the joints to rust. a little rust remover and some paint would clean it up. As you can see there's no dents/dings in it, was barely used.
This manifold has the crossover removed, will need bolts to re-attach it.
FMS Shorty Headers, drivers side is cracked on the rear and someone tried to repair it. These got some moisture and surface rust as well. They could easily be cleaned up and welded.
Steeda shift ****, needs a polish
Steering wheel/airbags
Bassani BX catted X-pipe. $100
BBK o/r H-pipe for 96-98 Cobra sold
T45 tranny from 98 Cobra with about 65k on it. No grinding, always has shifted smooth for me. $450
I also have 2 non-pi intakes with the aluminum crossover. Asking $100 each.
Alternator $50
Starter $30
Radiator from 99 Cobra $60
Airbags, they are gray. $60 for drivers side, $50 for passenger side. drivers side pending
Tail lights. $50
I have the mach stuff without any speakers (the box and door tweeters) $25
There's a motor in my driveway with about 145k on it with a spun rod bearing. gone
A-pillar 3 gauge pod. $15
Steeda shift **** gone
Aftermarket clear head/corner lights. $30
Charcoal steering wheel in decent shape. $40
Misc gray interior panels - let me know what you need.
There's some other various stuff so if you need somethin just ask and I may have it. I'll try to get pictures of all this stuff when I get off work. Please email me at jmmorgan82@gmail.com, as I don't get on here too often.
I'd prefer pickup but I can ship most of this stuff out (not the tranny).
h-pipe got some mist on it, caused the joints to rust. a little rust remover and some paint would clean it up. As you can see there's no dents/dings in it, was barely used.
This manifold has the crossover removed, will need bolts to re-attach it.
FMS Shorty Headers, drivers side is cracked on the rear and someone tried to repair it. These got some moisture and surface rust as well. They could easily be cleaned up and welded.
Steeda shift ****, needs a polish
Steering wheel/airbags
Last edited by jmmorgan82; 01-05-2009 at 06:41 PM. Reason: sold some stuff
#2
#9