Made a few pulls on the dyno yesterday.
#1
Made a few pulls on the dyno yesterday.
made some pulls at DB this morning !!
First off this is on E70-75. Still haven't gotten any real e85 at the pumps yet in my area. We tuned it to be pretty safe once we end up getting the e85 and it leans the tune out a bit so the A/f ratios are a bit fat right now. This is a precision billet 76mm turbo. Stock hellion kit and open down pipe. Still running a draw through with sct 3000 MAF.
https://www.youtube.com/watch?v=xgOjMgQkri4
Then we thought lets make a quick 900+ pull just to say we did. this pull was 24 psi.
http://www.youtube.com/watch?v=4SG_ZMDTdQk
Final peak numbers were 931 whp 984 tq. To get to 1000 i need to go to a blow through MAF w/boost-a-spark or a BS3 and also up the injectors since those were maxed.
not sure how to embed videos on here.
First off this is on E70-75. Still haven't gotten any real e85 at the pumps yet in my area. We tuned it to be pretty safe once we end up getting the e85 and it leans the tune out a bit so the A/f ratios are a bit fat right now. This is a precision billet 76mm turbo. Stock hellion kit and open down pipe. Still running a draw through with sct 3000 MAF.
https://www.youtube.com/watch?v=xgOjMgQkri4
Then we thought lets make a quick 900+ pull just to say we did. this pull was 24 psi.
http://www.youtube.com/watch?v=4SG_ZMDTdQk
Final peak numbers were 931 whp 984 tq. To get to 1000 i need to go to a blow through MAF w/boost-a-spark or a BS3 and also up the injectors since those were maxed.
not sure how to embed videos on here.
#9