Terminator Rebuild parts list! HELP.
#1
Terminator Rebuild parts list! HELP.
Long story short, bought a bagged Termi, spun a rod bearing three months later. I decided to a full build. The car has been sitting with the engine out for 4 years. Life got in the way, but now I'm settled and am ordering the rest of my parts.
I might add, the car is 6 hours away from home in a friend's shop, there's less access to parts out there so I want to have EVERYTHING I need.
I am not rebuilding the heads
So far, I have bought the livernois rotating assembly (crank, bearings, rings, pistons, rods) I can't remember if it came with main bearings. My boyfriend bought me main studs for my birthday.
My list so far:
head studs, flywheel studs, flexplate bolts, side bolts (all ARP), fel-pro head gasket set, JBA shorty header, Centerforce clutch, flywheel, pilot and throw out bearing, head cooling mod.
What else do I need to add? There has to be specific seals, gaskets and stuff that need replacing.
And what specific tools, I'm reading the service manual and it's listing special tools for removing/replacing seals and such.
I might add, the car is 6 hours away from home in a friend's shop, there's less access to parts out there so I want to have EVERYTHING I need.
I am not rebuilding the heads
So far, I have bought the livernois rotating assembly (crank, bearings, rings, pistons, rods) I can't remember if it came with main bearings. My boyfriend bought me main studs for my birthday.
My list so far:
head studs, flywheel studs, flexplate bolts, side bolts (all ARP), fel-pro head gasket set, JBA shorty header, Centerforce clutch, flywheel, pilot and throw out bearing, head cooling mod.
What else do I need to add? There has to be specific seals, gaskets and stuff that need replacing.
And what specific tools, I'm reading the service manual and it's listing special tools for removing/replacing seals and such.
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM