cruisin5268d

Is this only for the 2015?

jz78817

no it's for anything from MY2011.

cruisin5268d

Awesome, thank you for the tip! I'll have to investigate a bit and I will be sure to not mess with screen calibration. I have not seen a thread for the 13/14 (or even 2011+) so this might be a good time to start one for Hidden / Secret / Little known features such as this one.


OP, sorry for the hijack!

cruisin5268d

I have made about a 20 attempts to do this on my '13 GT/CS with the Shaker Pro / 1000 / whatever....with no luck.

I was using the physical buttons on the stack for right seek and eject. All it did was try to eject the disc 1/2 the time (no disc was loaded).

jz78817

ugh, I was being too general. what I said works for cars/trucks with MyFord Touch (SYNC Gen.2.) For your car (you have SYNC Gen.1+,) you want to press and hold preset buttons 3 and 6.

ticopowell

Does holding the reset button on startup bring up a diagnostic menu in the 2015 as well? I know with my 14 if I hold the reset button for about 10 seconds on startup I can access a menu showing lots of information, and some of it is actually useful too! It shows coolant temp in Centigrade is why I have used it, it has a digital mph and tach too, I know it shows fuel level in each tank, but I don't remember what else.

Might be worth trying

cruisin5268d

That did the trick, thank you!

Any idea why Ford sticks it to Mustang owners by not offering the MFT all these years - at least with the Premium models?

jz78817

MyFord Touch only works on a newer electrical architecture (CGEA 1.2/1.3.) for any number of reasons, S197 stayed with the older CGEA 1.1 until its end. Probably wasn't worth the investment to tear up the architecture with only a couple of model years left.

cruisin5268d

Ask and ye shall receive. Thank you very much for the information!

908ssp