What are your mods for this spring?
#1
What are your mods for this spring?
Well we had this discussion before, but everyone has changed plans 50 times... so seeing as there is about another 2 and half months to wait, lets discuss.....
i have an SLP fan switch [&:][:-]
i want to get Moser 31 spline axels and a detroit tru-track (dump the 35's and spool)
i have an SLP fan switch [&:][:-]
i want to get Moser 31 spline axels and a detroit tru-track (dump the 35's and spool)
#2
RE: What are your mods for this spring?
Ill post up, but nobody rip on me...
MM full length subframe connectors. be here tues! too good of a deal...
duals, fix the exhaust leak. flow 40's and high flow cats
headers- fix the cracked manifold.
jim, looking to get back into the stangs, i see?
MM full length subframe connectors. be here tues! too good of a deal...
duals, fix the exhaust leak. flow 40's and high flow cats
headers- fix the cracked manifold.
jim, looking to get back into the stangs, i see?
#3
RE: What are your mods for this spring?
Finally replace my manifold/tailpipe gasket.
New headlight housings, new tires/wheels, move my spoiler back, put my tweeters in the mach housings.
O/R H pipe (in the mail), 3.73s, short throw, a new air filter, some kind of handheld tuner.
With both jobs I make $600 a week now. MODS A PLENTY.
New headlight housings, new tires/wheels, move my spoiler back, put my tweeters in the mach housings.
O/R H pipe (in the mail), 3.73s, short throw, a new air filter, some kind of handheld tuner.
With both jobs I make $600 a week now. MODS A PLENTY.
#4
RE: What are your mods for this spring?
welllll my plans that i havent changed kinda lol
headers - have
SCT livewire - have
heads - half payed :-D almost there
Clutch
Tires
Cams? Juice? - undecided
Swarr Bar
well transmisson...but its a need stock part...
me forgots!!!!
buddy at work...welding axle tubes in
might get torue boxes welded with georgy!!
headers - have
SCT livewire - have
heads - half payed :-D almost there
Clutch
Tires
Cams? Juice? - undecided
Swarr Bar
well transmisson...but its a need stock part...
me forgots!!!!
buddy at work...welding axle tubes in
might get torue boxes welded with georgy!!
#6
RE: What are your mods for this spring?
Need to buy still in bold:[/align][/align]Subframe connectors - (Have)[/align]Upper/Lower Rear control arms - (Have)[/align]Trickflow Stage1 Cam[/align]GT-40 heads w/port&polish[/align]GT-40 Tubular Upper Intake manifold- (Have)[/align]GT-40 Lower Intake manifold, ported - (Have)[/align]Intake Elbow adapter - (Sale Pending)[/align]70mmBBK Throttle Body - (sale pending)[/align]75mm MAF - (Have)[/align]24# Injectors - (Need to pick up from tuner)[/align]Cold Air Intake[/align]Fuel Pressure Regulator[/align]Tune[/align]Magnaflow Magnapacks Cat-Back[/align]MAC o/r H-pipe - (Have)[/align]Zex 100hp dry shot - (Have)[/align]BFG Drag Radials[/align]Car to bodyshop to fix quarter panel[/align]Cobra Diamond Clear headlights & clear foglights[/align]Reinforced torque boxes[/align][/align]Maybes:[/align]Rebuild t-lok, if it needs it[/align]Swarr bar[/align]Recharge A/C[/align]Spec 2 clutch, when stock one wears out[/align][/align][/align]Wow thats a long list when I put it all together.[/align] [/align] [/align] [/align] [/align]
#7
RE: What are your mods for this spring?
the new built transmission that i bought is going in, im fixing all the body damage from that god forsaken deer accident. and hopefully if i have enough left over from my tax returns i can by some long tubes to go with my off road h-pipe that i have sitting in my garage. im also going to get my hands on an intake manifold.
#8
RE: What are your mods for this spring?
ORIGINAL: bikeboy587
Subframe connectors - (Have)[/align]Upper/Lower Rear control arms - (Have)[/align]Trickflow Stage1 Cam[/align]GT-40 heads w/port&polish[/align]GT-40 Tubular Intake - (Have)[/align]Intake Elbow adapter[/align]70mmBBK Throttle Body[/align]75mm MAF[/align]24# Injectors[/align]Cold Air Intake[/align]Fuel Pressure Regulator[/align]Tune[/align]Magnaflow Magnapacks Cat-Back[/align]MAC o/r H-pipe - (Have)[/align]Zex 100hp dry shot - (Have)[/align]BFG Drag Radials[/align]Car to bodyshop to fix quarter panel[/align]Cobra Diamond Clear headlights & clear foglights[/align]Reinforced torque boxes[/align][/align]Maybes:[/align]Rebuild t-lok, if it needs it[/align]Swarr bar[/align]Recharge A/C[/align]Spec 2 clutch, when stock one wears out[/align][/align][/align]Wow thats a long list when I put it all together.[/align] [/align] [/align]
Subframe connectors - (Have)[/align]Upper/Lower Rear control arms - (Have)[/align]Trickflow Stage1 Cam[/align]GT-40 heads w/port&polish[/align]GT-40 Tubular Intake - (Have)[/align]Intake Elbow adapter[/align]70mmBBK Throttle Body[/align]75mm MAF[/align]24# Injectors[/align]Cold Air Intake[/align]Fuel Pressure Regulator[/align]Tune[/align]Magnaflow Magnapacks Cat-Back[/align]MAC o/r H-pipe - (Have)[/align]Zex 100hp dry shot - (Have)[/align]BFG Drag Radials[/align]Car to bodyshop to fix quarter panel[/align]Cobra Diamond Clear headlights & clear foglights[/align]Reinforced torque boxes[/align][/align]Maybes:[/align]Rebuild t-lok, if it needs it[/align]Swarr bar[/align]Recharge A/C[/align]Spec 2 clutch, when stock one wears out[/align][/align][/align]Wow thats a long list when I put it all together.[/align] [/align] [/align]
#9
RE: What are your mods for this spring?
no he saying he has all that butt he wwants
Maybes:Rebuild t-lok, if it needs itSwarr barRecharge A/CSpec 2 clutch, when stock one wears outWow thats a long list when I put it all together.
Maybes:Rebuild t-lok, if it needs itSwarr barRecharge A/CSpec 2 clutch, when stock one wears outWow thats a long list when I put it all together.