V6 swap to 460 Big Block
#12
Agreed. Those heads should be upgraded to the PI heads from 99-04 at least. If not, take them off for some serious port work then run some boost to it.
Edit: There were some great SVO heads back then if you can track them down.
Edit: There were some great SVO heads back then if you can track them down.
Last edited by LilRoush; 07-14-2010 at 05:45 PM.
#13
. The engine will fit fine. It's physically smaller than the 4.6 and no small block will make the power that big block will. Don't let no shade tree mechanic tell u different. Very few mods to that big block will make gobs of tourqe you just need some stiffer springs and shocks up front. I've did this swap in my bullitt. If u shop around like I did I got a 460 that makes 630 at the wheels for less than 3000
#16
. The engine will fit fine. It's physically smaller than the 4.6 and no small block will make the power that big block will. Don't let no shade tree mechanic tell u different. Very few mods to that big block will make gobs of tourqe you just need some stiffer springs and shocks up front. I've did this swap in my bullitt. If u shop around like I did I got a 460 that makes 630 at the wheels for less than 3000
#18
Yeah lol I noticed that but the guy I quoted posted this month. I just don't like seeing people leaving false hope/bad ideas/ and misinformation for someone to find later. Especially when they bash about 90% of the people on the forum they are posting on.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
treesloth
New Member Area
4
09-28-2015 07:03 AM