When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im finally done installing my long tube headers, but there is one thing i wanna make sure of. now all i have is the headerson the car and the o2 sensors on the headers pluged in. and the h pipe is not installed or the 02 sensors in the back, and the car is giving me trouble codes: P0141 02, and P0161, and i replaced the 02 sensors on the headers with these: http://www.americanmuscle.com/ntk-o2-sensor-22060.html
is everything gonna be ok after the shop installs the h pipe and plugs in my rear 02 sensors with my MIL eliminators??
Last edited by xToPPxDoGGx; 10-25-2010 at 04:42 PM.
You should. Because the o2 sensors are in a different spot, they heat up and cool down faster, so it'll throw the numbers off a little from the stock tune. I've read that can cause cylinder washdown.