M112/3.8 Diablo Tune

Reply Subscribe

Thread Tools

Search this Thread

10-15-2012, 11:30 AM

sixshooterND

Thread Starter

Join Date: Oct 2012

Location: North Dakota

Posts: 4

M112/3.8 Diablo Tune

Does anyone know of a tune from Diablo (or one that uses their software) for a 2001 3.8liter with an Eaton M112 swap?

10-15-2012, 07:06 PM

jthorn9

The Godfather

Join Date: Sep 2005

Location: Temple, Texas

Posts: 15,481

You can not use a canned tune, you will need a custom dyno tune.

10-16-2012, 07:31 AM

sixshooterND

Thread Starter

Join Date: Oct 2012

Location: North Dakota

Posts: 4

Ok. I saw one on VMP Tuning that was written with SCT Performance software. I was hoping that if anyone had something like that from Diablo that I could load it up with my Preditor Flash Tuner. Then I could get it close and tweak from there.

http://www.vmptuning.com/store/index...=280&parent=96

10-16-2012, 08:47 PM

jthorn9

The Godfather

Join Date: Sep 2005

Location: Temple, Texas

Posts: 15,481

Email diablo or call them and find out if they have a canned tune that will be good enough to at least keep the car running effectively.

10-16-2012, 10:43 PM

ESG-642T

Buyer Beware

Join Date: Oct 2007

Posts: 3,586

Quote:

Originally Posted by sixshooterND

99.9% your looking at a no answer.

10-17-2012, 05:47 PM

LilRoush

6th Gear Member

Join Date: Feb 2007

Location: South FL

Posts: 8,540

Diablo has no tune for the M112. It has to be done on an dyno (custom) or from Justin @ VMP. I would suggest Justin or I can recommend a couple places in the Twin Cities for you if you'd like to make the drive down.

10-18-2012, 07:32 AM

sixshooterND

Thread Starter

Join Date: Oct 2012

Location: North Dakota

Posts: 4

Ok, thanks guys. I've talked with Andy at Dyno Tune USA in Watertown, South Dakota about installing a Pro-Charger before I found the M112 option. It is closer than the Cities and he comes very highly recomended. I will probably rent a dolly and tow my Mustang down there when I get everything installed.