Notices
V6 S197 General Discussion This section is for technical discussions pertaining specifically to the V6 variation of the 2005 and newer Ford Mustang.

2007 Mustang V6 Stock Dyno Run

Thread Tools
 
Search this Thread
 
Old 06-21-2012, 06:15 PM
  #1  
pardopachiv
1st Gear Member
Thread Starter
 
pardopachiv's Avatar
 
Join Date: Apr 2012
Location: Manitoba
Posts: 81
Default 2007 Mustang V6 Auto Stock Dyno Run *87 octane tune dyno updated*

Here is my numbers for my 2007 stock with only K&N oil and air filter @87 Octane:

The Dyno is done by SuperFlow WinDyn Software

CWhlPw (HP to wheel) 178.5 @ 5158rpm @ 77.4mph

CWhlTq (TQ to wheel) 191.8 @ 3956rpm @ 54.5mph

Will have second dyno tomorrow with FRPP X-pipe, GT takeoff dual muffler, FRPP CAI, and Bama 87 Tune

Tried to test how the car react from 0-60mph(or 0-100kph) this afternoon, significant shift change was noticed at 80kph; because I used cellphone stopwatch for test, so the result was not pleasant. Would like hear from you guys how do you test your pony for 0-60?

Thanks guys


Second Dyno run:
87 octane tune, FRPP X-pipe, dual with GT takeoff muffler, FRPP CAI. My car factor: 07 V6 pony package, 17 inch wheels, other performance add-ons other than above - K&N oil filter and FRPP 05-09 GT front lower control arms.

The Dyno is done by SuperFlow WinDyn Software

CWhlPw (HP to wheel) 194.4 @ 5176rpm @ 77.7mph gain: 15.9

CWhlTq (TQ to wheel) 207.9 @ 3653rpm @ 48.6mph gain: 16.1

Will continue third dyno run with 91 octane in next couple days, I will just road test the 89 octane tune before 91 tune dyno, wasted too much money already...

Last edited by pardopachiv; 06-25-2012 at 06:19 PM. Reason: *87 octane tune dyno updated*
pardopachiv is offline  
Old 06-21-2012, 09:38 PM
  #2  
flyhigh@mach1
2nd Gear Member
 
flyhigh@mach1's Avatar
 
Join Date: Apr 2012
Location: FL
Posts: 184
Default

I have the Ford tune...looking forward to seeing your new numbers.
flyhigh@mach1 is offline  
Old 06-21-2012, 09:59 PM
  #3  
05screaminyellow
1st Gear Member
 
05screaminyellow's Avatar
 
Join Date: Jun 2012
Location: Canada
Posts: 141
Default

Originally Posted by flyhigh@mach1
.looking forward to seeing your new numbers.
Ditto ... I am very interested as well ... is your car a auto or manual?
05screaminyellow is offline  
Old 06-21-2012, 10:40 PM
  #4  
Stang-aholic
4th Gear Member
 
Stang-aholic's Avatar
 
Join Date: Aug 2008
Location: FL
Posts: 1,173
Default

those sound like decent starting numbers! but im excited to see after. was this an auto or manual?
Stang-aholic is offline  
Old 06-22-2012, 10:22 PM
  #5  
Shelby350Mike
2nd Gear Member
 
Shelby350Mike's Avatar
 
Join Date: Aug 2011
Location: Pennsylvania
Posts: 166
Default

Get numbers for the 87 Street tune, and your performance and race tune, curious as too the difference measurement wise. (Mainly because I have almost the same mods on my car)
Shelby350Mike is offline  
Old 06-25-2012, 02:09 PM
  #6  
AMDanBailer
Former Sponsor
 
AMDanBailer's Avatar
 
Join Date: Oct 2009
Location: PA
Posts: 2,271
Default

Originally Posted by pardopachiv
Here is my numbers for my 2007 stock with only K&N oil and air filter @87 Octane:

The Dyno is done by SuperFlow WinDyn Software

CWhlPw (HP to wheel) 178.5 @ 5158rpm

CWhlTq (TQ to wheel) 191.8 @ 3956rpm

Will have second dyno tomorrow with FRPP X-pipe, GT takeoff dual muffler, FRPP CAI, and Bama 87 Tune

Tried to test how the car react from 0-60mph(or 0-100kph) this afternoon, significant shift change was noticed at 80kph; because I used cellphone stopwatch for test, so the result was not pleasant. Would like hear from you guys how do you test your pony for 0-60?

Thanks guys
pardopachiv,

Not bad for a stock 6! You will see a huge gain from those mods, Post up some #s when you get the results!

- Dan
AMDanBailer is offline  
Old 06-25-2012, 06:04 PM
  #7  
pardopachiv
1st Gear Member
Thread Starter
 
pardopachiv's Avatar
 
Join Date: Apr 2012
Location: Manitoba
Posts: 81
Default

Originally Posted by AMDanBailer
pardopachiv,

Not bad for a stock 6! You will see a huge gain from those mods, Post up some #s when you get the results!

- Dan
just posted new numbers on 87 tune, not huge gain but considerably good numbers though
pardopachiv is offline  
Old 06-25-2012, 06:06 PM
  #8  
pardopachiv
1st Gear Member
Thread Starter
 
pardopachiv's Avatar
 
Join Date: Apr 2012
Location: Manitoba
Posts: 81
Default

Originally Posted by Shelby350Mike
Get numbers for the 87 Street tune, and your performance and race tune, curious as too the difference measurement wise. (Mainly because I have almost the same mods on my car)
too much cost to do all three, i've done the 87 street, will do 91 race in couple days, plz see the updates.
pardopachiv is offline  
Old 06-25-2012, 09:05 PM
  #9  
05screaminyellow
1st Gear Member
 
05screaminyellow's Avatar
 
Join Date: Jun 2012
Location: Canada
Posts: 141
Default

not bad gain at all really, picked up basically 16hp and 16lb torque ... i really llike how your are turning 300 less rpm and making the extra torque!

looking forward to the 91 race tune
05screaminyellow is offline  
Old 06-26-2012, 10:08 AM
  #10  
kevinmalec
5th Gear Member
 
kevinmalec's Avatar
 
Join Date: Apr 2008
Location: Acworth, GA
Posts: 3,666
Default

Originally Posted by 05screaminyellow
not bad gain at all really, picked up basically 16hp and 16lb torque ... i really llike how your are turning 300 less rpm and making the extra torque!

looking forward to the 91 race tune
Nice! I've read the difference beween the 87 custom tune vs. 91 custom race tune will be between (5 - 7) more HP.

Be sure to post the new numbers on the 91 race tune!
kevinmalec is offline  


Quick Reply: 2007 Mustang V6 Stock Dyno Run



All times are GMT -5. The time now is 06:21 PM.