Forged 4.6 MOD Rotating Kits On Sale!!! HMS
#11
RE: Forged 4.6 MOD Rotating Kits On Sale!!! HMS
thats what I wanted to hear. So your kit is "ready to go" then, my guy wants to double check the balencing of the parts, but so long as piston slap and such will not be a problem with this kit, we may be getting somewhere. I have low mileage (25k) so my builder wants to look at it, but hes 98% sure hes going to want to machine it. I think 20 over and forged goodies , with some head work should be a nice for a daily driver 550-650 rwhp (650 or so probly on spray) (500-550 full time). Is this that kit?
#12
RE: Forged 4.6 MOD Rotating Kits On Sale!!! HMS
Yes, our balanced kits are ready to go....the only thingon your side is machine work on the block...i.e. boring, hone etc. We can always shipa kit to you Unbalanced. This way "your guy" can do the balancing.
Casey
Casey
#14
RE: Forged 4.6 MOD Rotating Kits On Sale!!! HMS
Hello Adude When you "stroke" an engine, you are making it a bigger displacement engine. This is done by the crankshaft....more stroke.The stock stroke on a 4.6 is 3.54". Our stroker crank is 3.75" On a stock bore, the engine size goes from 280.9 to 297.3cubic inch. Power wise, it is hard to say what you will pick up with on a stock engine. We have never tested a stroker motor with all stock parts. You will definetly pick up torque, which is always good!
Casey
Casey
#15
RE: Forged 4.6 MOD Rotating Kits On Sale!!! HMS
Can you put together a kit for a 5.4 2v? Just a stock crank(not forged)with forged rods and pistons.....no rings? How much for just those 3 items if they are available?
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM