I was wondering if anyone has attempted the installation on the window scoops found here.

http://wheelskin.com/dg-124467.html

If so, does it use a bracket system? Also, would one recommend ordering pre-painted parts?

Just ordered my new stang on Tuesday, and I can't wait to get it!!

Thanks in advance!

 

I boughtmy quarter window louvers from wheelskin and both mine and the ones you ordered attach to the glass with 3M double sided tape. It's all in the surface prep. Ambient temperature between 60 and 80 Deg. F, glass cleaned with 90% or higher isopropyl alcohol or an acceptable solvent from an autoparts store made specifically for stripping surfaces for mounting preperations, 24 hours cure time (no driving)... Just be sure you have a steady hand. Once the tape touches the glass, it's a real bi**h to remove. I'd reconsider the closed ones. The ones I have you can see thru... http://wheelskin.com/dg-3180.html

Those scoops COME painted. You just need to give them your paint code. My alloy window louvers and side scoops from wheelskin were a perfect match.

[IMG]local://upfiles/70965/3E25768C3594403A9906EE355B5BBF2B.jpg[/IMG]

 

I just put the Cervini window & side scoops on my 08 GT Prem.(Black). Temp had to be 75deg. and I had to let them set for 24hrs. Pic
http://i110.photobucket.com/albums/n...mustang014.jpg

http://i110.photobucket.com/albums/n...mustang016.jpg

 

I got a set of the prepainted slotted ones. Fit great, stick great (I have sprayed mine several times with the power wand at the car wash) and the color matched perfectly.

 

Those look really good!