Strut Tower Brace
Any input on strut towers braces that will fit over the factory GT plenum cover? Most seem to have a note that "will not fit over factory plenum cover".. Thanks!
|
I have a 2007 GT/CS conv. Purchased a Granitalli (spelling ???) strut brace on another forum and it fits over the cover using a few thin washers under two of the mounting holes. This strut brace isn't as fancy looking as some others, but it does the same job and is a lot cheaper ($$$).
GrumpysGT |
I believe the frpp brace will cover it.
|
The stock strut brace on the new 2010 Mustang GT looks good and mounts over the plenum cover. I'm not sure if the 2010 has more hood clearance than older models though.
http://img269.imageshack.us/img269/6...towerbrace.png |
2 Attachment(s)
the oem Bullitt brace part# 8R3Z-16A200-A clears with room to spare, it's the same brace as the FRPP V6 brace part# M-20201-F.
|
The Agent47 Double Barrel Brace will fit as well.
Just found out it doesn;t fit over the new FRPP GT Supercharger but it clears the GT Plenum Cover. http://www.southernmustangparts.com/...rrel01_600.jpg This brace is very similar to the standard GT brace in that is uses chromoly tubes Tig welded to CR steel boxed structures. It is different because it uses two smaller 1” chromoly tubes bent for maximum clearance over the engine. These boxes use all four bolts on the tower to mount the brace solidly( no heim joints to pivot). http://www.southernmustangparts.com/...rrel03_600.jpg One look at one of these braces and you will see the design, fit, welds, and finish are second to none. They come in a black powdercoat and install time is less than 15 minutes. Check them out at www.southernmustangparts.com or just click the link below to see all our Agent47 inventory Mustang Agent47 Parts Ken |
Originally Posted by Alloy Metallic
(Post 6411736)
Any input on strut towers braces that will fit over the factory GT plenum cover? Most seem to have a note that "will not fit over factory plenum cover".. Thanks!
|
Originally Posted by partsbill
(Post 6413426)
the oem Bullitt brace part# 8R3Z-16A200-A clears with room to spare, it's the same brace as the FRPP V6 brace part# M-20201-F.
|
Originally Posted by southernmustangparts
(Post 6413541)
The Agent47 Double Barrel Brace will fit as well.
Just found out it doesn;t fit over the new FRPP GT Supercharger but it clears the GT Plenum Cover. http://www.southernmustangparts.com/...rrel01_600.jpg This brace is very similar to the standard GT brace in that is uses chromoly tubes Tig welded to CR steel boxed structures. It is different because it uses two smaller 1” chromoly tubes bent for maximum clearance over the engine. These boxes use all four bolts on the tower to mount the brace solidly( no heim joints to pivot). http://www.southernmustangparts.com/...rrel03_600.jpg One look at one of these braces and you will see the design, fit, welds, and finish are second to none. They come in a black powdercoat and install time is less than 15 minutes. Check them out at www.southernmustangparts.com or just click the link below to see all our Agent47 inventory Mustang Agent47 Parts Ken that is a great looking bar. I like the 4 mounting bolts. The 2 tubes give it a sweet look too. It looks strong. |
Ordered the Steda for AM, gonna paint it titanum silver and cover the Steeda script area with a piece of polished aluminum. Thanks for all the input, do a post when I get it finished.
http://www.americanmuscle.com/stststtobr2.html |
All times are GMT -5. The time now is 04:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands