Can anyone help with this problem???
#1
Can anyone help with this problem???
I brought my car to the shop today to install the Pioneer AVIC-D2 Head Unit on my GT. Everything works accordingly EXCEPT everytime I turn the Car ON...my speakers make a popping noise.
Can someone please help me so that I can let these morons at the shop know. Thanks for your time!
Nothing can ever go right!!!!!!
Can someone please help me so that I can let these morons at the shop know. Thanks for your time!
Nothing can ever go right!!!!!!
#2
RE: Can anyone help with this problem???
From what I've read, you need to solder a resistor in line. No personal experience, just what I've read on here. Search a couple of threads down about aftermarket HU's.....It even has photos. It's about a 5 dollar radio shack purchase, I believe....
#3
RE: Can anyone help with this problem???
"You need to wire a 5v voltage regulator in between the 12v amp "on" wire from your head unit and the 2 amp "on" wires on the wiring harness. 12v is too much for the shaker amps and adding the 5v regulator fixes it." Tell your shop that they should know what wires are which....if they don't I'd be scared []
#5
RE: Can anyone help with this problem???
Yup ... thats what I did ... no POP with the 5V resistor ...
https://mustangforums.com/m_1886674/tm.htm
What stereo shop would even give it back to you in that condition?
https://mustangforums.com/m_1886674/tm.htm
What stereo shop would even give it back to you in that condition?
#7
RE: Can anyone help with this problem???
So this is the part I need... http://www.radioshack.com/sm-5v-fixe...i-2062599.html ??????
Do I need a heatsink or something like it says on the page???
Thanks!!
Do I need a heatsink or something like it says on the page???
Thanks!!
#8
RE: Can anyone help with this problem???
When I bought mine at Radio Shack ... a small aluminum finned Heatsink was right next to it on the rack ... so I bought that as well as the Heat Sink Screw Kit ... the entire setup was like $7 .... Not sure if it's necessary but I don't want any problem and have to take apart the dash again ...
#9
RE: Can anyone help with this problem???
cool...I'm gonna pick the stuff up right now and have my girlfriend bring them to the shop. You would think these morons have the parts they need to do the job right!! Unbelievable!
Thread
Thread Starter
Forum
Replies
Last Post
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM