Guys,

I put the Hurst-Comp plus on my 06' GT. I noticed today that when the car is cold, the shifter begins to vibrate at 3K rpm's. The noise stops after the car warms up, Any ideas?

 

Only thing i can suggest is put locktite on the 2 hex botls that connect the shifter to the shifter arm. They kept coming loose on mine and that took care of it. Or you may have not tightened the bolts underneath tight enough.

 

Your stick bolts are loose like blaven said.

 

Same thing as above. My bolts came loose...

 

I really like some of you guys right now!, always there to help. I will give it a try.

 

So guys are you refering to the bolts in the picture?

 

yes, put loctite on them

 

Do any of you guys know what size torq bit I need to tighten up the shifter like in the picture?

 

Not to sure on what size, i just have a keychain i bought of all different sizes for a few dollars. I"d go down and check on my car but its still in the shop till monday.

 

Red or blue locktite for the 2 bolts on the shifter handle covers many peoples concren from previous thread!