I got my raptor a few days ago but i was messing with some other mods and got around to it today. I followed the write up one of the members posted for his. Hooked the power wire to the fuse box with that add a circuit. Grounded the black wire on the screw with the ground wire hooked to it from the factory and hooked into the cylinder wire. The only things i can think of is the circuit thing is bad, do i need 2 fuses in that harness or will 1 work? Also will the raptor light up without turning the car on and leaving it in the acc position? I did both and still nothing. Anyone have any suggestions on what i may have hooked up wrong? Thanks in advance.

 

Maybe you hooked into a dead circuit....I'll check my fuse # and post back

 

It was the one in the bottom left hand corner, unless it was changed in the 07's, then that may be the problem

 

I used circuit # 6

 

Thank you for checking, gonna go down and check real quick on mine and see where i had it.

 

Yup that was it, took it out of #4 and put it in #6 like you said and turned the key and there were the red lights. Thanks again for checking!

 

No Problem