Will I need to installadjustable camber bolts using Eibach Pro Kit springs. If so where the heck do they go? I've search for installation instructions but can't seem to locate any. I'm doing this lowering kit tomorrow morning and could use this info. I've read Taco Bill's install instructions and I'm ready, thought I'd paint the calipers at the same time.

 

They go in your front strut lower mounts.
They are eccentric and allow for easy
adjusting. Otherwise the shop manual shows
slotting the hole and just reinstalling the OEM
hardware.

 

or you could look for a caster/camber plate.

 

I already have the bolts. I think I'll let the allignment guy install them if need be.

 

Yea, you have to notch out the bolt holes in the strut to get them to work.