Having problems hooking up!
#1
Having problems hooking up!
My baby is only slightly modded, however with the cooler months upon us, she's a bit too much for the stock rubber. One of my favorite things to do, especially whenfriendswant togo for a ride, is get it up to about 20mph in 1st (about 3000rpm) and then mat that sombitch and hammer up through the gears.
But now when it's gets around 40 or below, the *** end breaks loose. And I'm not talking about just when I'm shifting hard into 2nd or 3rd, I'm talking when I hammer itmid gear (1stAND 2nd). Is it time for some beefier meats?
But now when it's gets around 40 or below, the *** end breaks loose. And I'm not talking about just when I'm shifting hard into 2nd or 3rd, I'm talking when I hammer itmid gear (1stAND 2nd). Is it time for some beefier meats?
#3
6th Gear Member
RE: Having problems hooking up!
I have similar problems. But I really don't want to do suspension mods other than replacing the stock shocks. What I was hoping to see here was a recommendation for stickier tires... I'm running the stock 235/50/18 BFG's.