How many of you have attempted this? how much did it cost you? Thanks.

i want 20x11.5 in the back

 

I looked into this as a possibility. I wanted to widen my rear stock bullets to 10 or 10.5.

$250 - $300 per wheel plus shipping and the wheels would be gone for two weeks. I decided I needed a new plan .

On a related note: I don't think 11.5s will fit into the wheel wells.

 

godt dayum.. 11.5 is widdde!

but hey, way to be unique.
i hope u find a solution

 

Justin from VMP Tuning widened the GT500 wheels to 11.5" in the rear. I believe he was using a 335 !! But he also said he had to do a few modifications to make it work. If you look at his website in the forums, you can find pictures etc. Unless you need the traction, why?

 

cost is about $200 for two inches on a 18" rim... a 20" could be more. (plus shipping)

Send an email to James@weldcraftwheels http://www.weldcraftwheels.com/

they have the best reputation for this work. I was going to have it done as well... but a new tire came out and solved my issue.

11.5 wide is going to require some modification. 11" seems to work.... seen a 315 on a 11" rim had maybe 1/2 clearance.

 

Oh okay. Thanks guys. I think it would be easier to get two 17x10.5 wheels.

 

yea go 10.5 wide. 11.5 is too big for our cars IMO

 

ive got 18x10 bullits in the back. 11.5 might look weird

 

I'm pretty sure he's going to be using this for a track set-up so who really cares if it looks wierd. It just needs to work.

 

Honestly i was thinking of ordering some HRE 20x12's