Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

HELP! with lowering

Thread Tools
 
Search this Thread
 
Old 02-08-2008, 06:44 PM
  #1  
Bucket05
1st Gear Member
Thread Starter
 
Bucket05's Avatar
 
Join Date: Feb 2007
Location:
Posts: 146
Default HELP! with lowering

ok I have a 05 V6 and i just had the Eibach Pro-Kit put on my car and went to a alignment done and the guy said that It was too low in the front (something like -2 degrees) and Thst I would need some Adjustable Strut plates?..Anyway other cheaper way to get around this????
Bucket05 is offline  
Old 02-08-2008, 06:48 PM
  #2  
99flhr
2nd Gear Member
 
99flhr's Avatar
 
Join Date: Aug 2007
Location:
Posts: 431
Default RE: HELP! with lowering

SEARCH "Camber bolts"
99flhr is offline  
Old 02-08-2008, 06:49 PM
  #3  
schapman
4th Gear Member
 
schapman's Avatar
 
Join Date: Aug 2006
Location: TX
Posts: 1,007
Default RE: HELP! with lowering

camber bolts for about $30. when i put my eibach on my camber was -1.5
schapman is offline  
Old 02-08-2008, 07:03 PM
  #4  
Aziraphale
4th Gear Member
 
Aziraphale's Avatar
 
Join Date: Feb 2007
Location: Northern Virginia
Posts: 1,459
Default RE: HELP! with lowering

BAM you up some of these:

http://www.lmperformance.com/7707/73.html
Aziraphale is offline  
Old 02-08-2008, 08:40 PM
  #5  
Bucket05
1st Gear Member
Thread Starter
 
Bucket05's Avatar
 
Join Date: Feb 2007
Location:
Posts: 146
Default RE: HELP! with lowering

Ok another question, I just need one set of Bolts or two? Thanks for the help!!
Bucket05 is offline  
Old 02-09-2008, 06:36 AM
  #6  
06elnr
5th Gear Member
 
06elnr's Avatar
 
Join Date: Jul 2007
Location: South Alabama *SOAL*
Posts: 2,664
Default RE: HELP! with lowering

or if you have a good alinement guy he can slot the bolt holes and get the same effect.
06elnr is offline  
Old 02-09-2008, 08:04 AM
  #7  
ink003
3rd Gear Member
 
ink003's Avatar
 
Join Date: Jun 2007
Location: Ewing, NJ
Posts: 740
Default RE: HELP! with lowering

is this a reputable shop? when my alignment was done after installing the pro-kit and d-specs, camber bolts were not necessary as i was still well within factory specs after some adjustment. i guess that varies tho.
ink003 is offline  
Old 02-09-2008, 08:09 AM
  #8  
0NF1R
5th Gear Member
 
0NF1R's Avatar
 
Join Date: May 2006
Location: Winter Haven, Florida
Posts: 2,214
Default RE: HELP! with lowering

I just lowered my car wiht roush springs....the dont slam it like the pro kit does but its gets 1 inch all around....do i need to go get an alignment done? and if so, what should i expectthe shopto tell me?
0NF1R is offline  
Old 02-10-2008, 05:13 PM
  #9  
D_Gusler
3rd Gear Member
 
D_Gusler's Avatar
 
Join Date: Jun 2007
Location: Danville, VA
Posts: 890
Default RE: HELP! with lowering

Yup, don't wanta eat them tires up do ya?
D_Gusler is offline  
Old 02-10-2008, 05:46 PM
  #10  
0NF1R
5th Gear Member
 
0NF1R's Avatar
 
Join Date: May 2006
Location: Winter Haven, Florida
Posts: 2,214
Default RE: HELP! with lowering

hoe much money does that normally run?
0NF1R is offline  


Quick Reply: HELP! with lowering



All times are GMT -5. The time now is 03:09 AM.