I dont see how you are gonna get a real accurate cut for the badge etc though.....

 

You can always have a good shop do the hard parts for you and you do everything else yourself, would probably save money that way too

 

I called them they have a 12" roll of the fdc 5 year vinyl at 2.8 mils thick so i should be easyer to apply then the avery. But they only have it in a 50 yard roll so, so would have tons left over also the roll is $47

 

A compass cutter would make a perfectly fine circle. Those are all of about $10.

 

for the curves and bumper maybe using a heat gun/blowdrier to make the vinyl easier to work with

 

That's what I was thinking for around the emblem. As for the 50 yard roll for $50, you could make the leftovers into a "superstripe" (hood only), and sell on eBay for $30 a pop!

 

Well that was for a 12" 50 yard roll so you can put racing stripes on your car instead i was thinking of getting the 50 yard roll and using 15 yards, and selling the rest to someone that wanted to so stripes too I figure that 15 yards is enought to do two stripes bumper to bumper with some left over for mess ups

 

Sounds like a plan -- post pics when you're done. Just be sure to get a good squeegee, prep the surface correctly, and take your time!

 

http://www.colebrothers.com/graphics/stripes.html

Already cut in 6" , 8" , 10" and 12" with or with out pinstripes for $40.00....This guy is great to deal with....

 

I like it the way he did much better than fully striped.