Finally stopped procrastinating
I got sick and tired of procrastinating, and finally pulled the trigger on a set of wheels and tires, that I haven't seen on any S197 Mustangs, to my knowledge. Latemodel Resto had a pretty bangin' deal on these, so I oculdn't pass em up.
They come as a packaged deal, 20x9 and 20x10, with Sumitomo HTRZIII 255/35 up front, and 275/35 in the back. Mounted and balanced, ready to bolt on. Even comes with a set of splined lugs. Can't beat it for $1,579.
Ready for it?

My other choice were the 20x10 +24 gunmetal Razors... but everybody has those, or so it seems.
I can't wait to see how they look.
They come as a packaged deal, 20x9 and 20x10, with Sumitomo HTRZIII 255/35 up front, and 275/35 in the back. Mounted and balanced, ready to bolt on. Even comes with a set of splined lugs. Can't beat it for $1,579.
Ready for it?

My other choice were the 20x10 +24 gunmetal Razors... but everybody has those, or so it seems.
I can't wait to see how they look.
Nice choice can't wait to see the installed pics&you will def want to lower it to, oh and not all of us have gunmetal razors some of us have chrome and even black with a few silver sprinkled in somewhere lol
Wheels look good.
275 at the back are too small on a 10" wide rim, IMO.
It'll look funky.
You need your tire to stick out a bit or at least be flush with the rim, but not go inwards
255 for the front on a 9" rim is just as bad...
I have 275s up front on a 8" rim and it looks perfect.
I run 285s at the back on a 10" rim and it was a mistake. Too narrow...
Those tires are Yokohama BTW.
Next set, it will be 305s (if they're not $400 a piece).
See pics...
275 at the back are too small on a 10" wide rim, IMO.
It'll look funky.
You need your tire to stick out a bit or at least be flush with the rim, but not go inwards
255 for the front on a 9" rim is just as bad...
I have 275s up front on a 8" rim and it looks perfect.
I run 285s at the back on a 10" rim and it was a mistake. Too narrow...
Those tires are Yokohama BTW.
Next set, it will be 305s (if they're not $400 a piece).
See pics...
Last edited by pascal; Oct 4, 2009 at 06:40 PM.


