Comp Cams
#1
Comp Cams
Anyone running comp cams with a twin screw? I am very seriously thinking of pulling the trigger on some with Brenspeed deal running in November... early Christmas present!
Guess these aren't the thumper cams, but assume there is a less aggressive lope?
http://www.brenspeed.com/127bren2.html
Custom grind twin screw sc cam kit.
Guess these aren't the thumper cams, but assume there is a less aggressive lope?
http://www.brenspeed.com/127bren2.html
Custom grind twin screw sc cam kit.
#2
Those are supposedly very good cams from what I hear.
However, Brenspeed told me that they have seen 30 rwhp increases with the ***** Thumpr (stage 2) w/ a saleen s/c'er. So something like that is not out of the question if you desire the lope. Since you have 4.10's, the low end issues some have will not apply.
The SPR stage 2 have a real nice, almost thumpr, kind of lope and gain very big. But of course need springs and phaser limiter.
I read on another board that Brenspeed is going to be selling Hot Rods soon.
However, Brenspeed told me that they have seen 30 rwhp increases with the ***** Thumpr (stage 2) w/ a saleen s/c'er. So something like that is not out of the question if you desire the lope. Since you have 4.10's, the low end issues some have will not apply.
The SPR stage 2 have a real nice, almost thumpr, kind of lope and gain very big. But of course need springs and phaser limiter.
I read on another board that Brenspeed is going to be selling Hot Rods soon.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM