When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I picked up some Roush pedal covers. I like them, they screw onto the pedals so no Gorilla glue involved.
Is that how their attached? Haha mine had them when I got it but I've been contemplating replacing them with the GT500 style as the friction padding on the clutch is completely worn off. If they're screwed in, might just be a good idea to find another set to replace them.
I personally don't think the ones on AM are the same . If you look, the pic on AM shows the gas pedal tapering on both sides. The ones from ACC Parts does not. Can't say for sure, but I think the AM version is a knock off. I also don't recall (been at least 6 years) the gas pedal from ACC having the rubber ***** protrude thru the back of the pedal, which of course would interfere with using 3M to tape it down....Again, could be wrong, but I can only relate my experience with the set from ACC. There were a ton of early 197 owners that had excellent success with them.....
Location: Thomasville, NC Where we beat headers into submission!!
Posts: 7,233
Originally Posted by HxCGuitars
Is that how their attached? Haha mine had them when I got it but I've been contemplating replacing them with the GT500 style as the friction padding on the clutch is completely worn off. If they're screwed in, might just be a good idea to find another set to replace them.
Yep, there's 4 screws in each cover. If they were installed per the instructions.