2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

Orange wrench issue

Thread Tools
 
Search this Thread
 
Old May 25, 2012 | 06:56 AM
  #1  
mighted1987's Avatar
mighted1987
Thread Starter
3rd Gear Member
 
Joined: Feb 2012
Posts: 648
From: Canada, Montreal
Default Orange wrench issue

My 2006 m90 roush supercharge mustang keep putting me in some kind
Of limp mode
Where my engine
Doesnt work correctly
With a orange
Wrench on the dash, parking
And
Staring back the car
Fix the car but the wrench will pop again later,it alway happen while
Cruising on highway at 60mph, there is no code...Ive noticed
a louder sound of the blower in low rpm and low speed when slowly accelering..

Last edited by mighted1987; May 25, 2012 at 10:16 AM.
Old May 25, 2012 | 08:06 AM
  #2  
lawrencecar1's Avatar
lawrencecar1
2nd Gear Member
 
Joined: Sep 2011
Posts: 369
From: Northern Virginia
Default

no ticket no laundry..
Old May 25, 2012 | 08:22 AM
  #3  
JimC's Avatar
JimC
Super Moderator
 
Joined: May 2006
Posts: 8,884
From: Michigan again!
Default

That is really tough to read - but without pulling the code no idea. Plug your tuner in and pull the code and try again.
Old May 25, 2012 | 09:32 AM
  #4  
Nyhm's Avatar
Nyhm
1st Gear Member
 
Joined: May 2012
Posts: 103
From: KY
Default

Are you disconnecting your battery terminal? Because that will clear the code out of the memory and yeah that was kinda hard to read lol
Old May 25, 2012 | 09:34 AM
  #5  
siggyfreud's Avatar
siggyfreud
5th Gear Member
 
Joined: Oct 2009
Posts: 2,645
From: Oregon
Default

If
No
Code
Please
Post
Data
Log
Thank
You.
Old May 25, 2012 | 09:44 AM
  #6  
Jas5's Avatar
Jas5
3rd Gear Member
 
Joined: Nov 2011
Posts: 667
From: OK
Default

there are many lol's to be had
Old May 25, 2012 | 10:13 AM
  #7  
mighted1987's Avatar
mighted1987
Thread Starter
3rd Gear Member
 
Joined: Feb 2012
Posts: 648
From: Canada, Montreal
Default

Writing from a phone,
I dont have any programmer currently so i cant data log
There is a roush computer in the engine, i just wanted to know
If this could be a commun issue for something particular..ill have to bring it to someone more experimented in computer cause my garage didnt see any code
Check engine light is alway there i dont have cats
And
For
My
English
You should know
That im pretty horrible at it,
Why do i have to justify each of post lol
Old May 25, 2012 | 10:20 AM
  #8  
Roush05's Avatar
Roush05
3rd Gear Member
 
Joined: Apr 2011
Posts: 986
From: Georgia
Default

I have had limp home mode come on a couple times when I was messing with my tune. For me, it was an AFR problem(I had a no-tune required Cold Air Intake and I set my tune to one that would require a tune, presumably screwing up the AFR). I believe there are a lot of different reasons that limp-home mode can pop up though.
Old May 25, 2012 | 11:57 AM
  #9  
siggyfreud's Avatar
siggyfreud
5th Gear Member
 
Joined: Oct 2009
Posts: 2,645
From: Oregon
Default

It's not your English I'm giving you a hard time about. It's actually quite good for a non-native speaker. It's that your posts are split into lines for

almost
every
word.

Makes it hard to read.
Old May 25, 2012 | 12:51 PM
  #10  
turbo 2.8's Avatar
turbo 2.8
3rd Gear Member
 
Joined: Jan 2008
Posts: 708
From: Delaware
Default

only time I got the wrench light was when one of the M.A.F. sensor wires grounded out. I also got no codes from it, and it went into limp mode.



All times are GMT -5. The time now is 12:18 PM.